Table of Contents
Advertisement
Current for time measurement 1
Mode defines for time measured current. It measures OFF-time and ON-time1 by setting value.
・It can be set the range of 0.1 to 100.0%F.S. (initial 50.0)
Ex) When 50.0 is set, the current exceeds 50.0%F.S. is measured as ON-time, the current under
50.0%F.S. is measured as OFF-time.
*For 1P2W, measured current is the current of CT1 for ON-time1(1)(1.HMA1) and CT2 for
ON-time1(2)(2.HMA1)
For 1P3W and 3P3W, measured current is the current of CT1.
It can't be set as CUTA > 1.HM-A.
Set it using <ITEM/△>,<SET>+<ITEM/△>.
Current for time measurement 2
Mode defines for time measured current. It measures ON-time1 and ON-time2 by setting value.
・It can be set the range of 0.1 to 100.0%F.S.
Ex) When 70.0 is set, the current exceeds 70.0%F.S. is measured as ON-time1, the current under
70.0%F.S. is measured as OFF-time.
*For 1P2W, measured current is the current of CT1 for ON-time2(1)(1.HMA2) and CT2 for
ON-time2(2)(2.HMA2)
For 1P3W and 3P3W, measured current is the current of CT1.
It can't measure ON-time1 when it set as 1.HM-A=2.HM-A.
It can't be set as 1.HM-A > 2.HM-A.
Set it using <ITEM/△>,<SET>+<ITEM/△>.
☆
(initial 50.0)
(0.1～100.0)
☆
(0.1～100.0)
↓<SET>
↓<SET>
36
KW2G/ KW2G-H Eco-POWER METER
Increase
Decrease
+
Increase
Decrease
+
Advertisement
Table of Contents
