Current alarm setting mode
Mode defines the ratio of current used for alarm output. (Ratio for the rated current)
・It is set the range of 0.1 to 100.0%.
Set it using <ITEM/△>,<SET>+<ITEM/△>.
Stand-by alarm setting mode 1
Mode defines the ratio of current used for threshold value to judge stand-by power.
(Ratio for the rated current)
・It is set the range of 0.1 to 100.0%.
Set it using <ITEM/△>,<SET>+<ITEM/△>.
Stand-by alarm setting mode 2
Mode defines the time used for threshold value to judge stand-by power.
・It is set the range of 0 to 9999min.
When '0' is set, alarm is always output at the time when judging the stand-by power.
When '1 to 9999' is set, alarm is output at the time when passing the setting time with the stand-by
power.
The alarm can be reset by pressing <SET> with the instantaneous electric power display. After
reset the alarm, start to monitor the stand-by power again.
Set it using <ITEM/△>,<SET>+<ITEM/△>.
Preset value setting mode
Mode defines count value used for output.
・It is set the range of 0(0.000) to 999999(999.999).
*The range differs according to the pre-scale set by pre-scale setting mode.
Set it using <ITEM/△>,<SET>+<ITEM/△>.
*It is only when 'AL-C' is selected on unit for pulse output setting mode.
(0.1 to 100.0)
*It is only when 'AL-S' is selected on unit for pulse output setting mode.
(0.1 to 100.0)
*It is only when 'AL-S' is selected on unit for pulse output setting mode.
( 0 to 9999 min.)
*It is only when 'Cnt' is selected on unit for pulse output setting mode.
( 0 to 999999)
↓<SET>
↓<SET>
↓<SET>
↓<SET>
38
KW2G/ KW2G-H Eco-POWER METER
Increase
Decrease
+
Increase
+
Decrease
Increase
Decrease
+
Increase
Decrease
+