Panasonic KW2G User Manual page 40

Mode 2...Mode for setting of each parameter for pulse measurement
Mode 3...Mode for setting of each parameter for serial communication
Mode 4...Mode for setting of each parameter for optional function
Mode 5...Mode for setting of year-month-date and time
When it shifts to expansion unit, mode 2, mode 3 and mode 5 are not displayed.
Only version check mode is available in mode 4.
Select M (Main unit) before the settings.
With version check mode (
The mode with ☆ is not displayed when the software version doesn't support it.
Monitor (Display when power on)
With SD <MODE> continous
Memory card
(Mode 1)
(SD Eject)＊
<SET> <SET>
Refer to the previous
page.
※),
without SD mamory card
Setting mode
(Mode 2 )
<SET>
Pulse input type
setting mode ☆
PULSE
<SET>
Max. measurement
speed setting mode
Hz
<SET>
Prescale setting
mode
PSCL
<SET>
Press <MODE> to return Monitor.
the version of each unit can be checked.
(Mode 3)
<SET>
Protocol setting
mode
PROT
<SET>
Station number
setting mode
NO
<SET>
Transmission
speed setting
mode
SPD
<SET>
Transmission
format
setting mode
FMT
<SET>
Stopbit setting
mode
STOP
<SET>
Response time
setting mode
RESP
<SET>
Monitor
31
KW2G-H Eco-POWER METER
(Mode 4) (Mode 5)
<SET>
Auto-off setting
timer setting
mode
OFF
<SET>
Version check
mode
VER
(※)
<SET>
Initialize memory
of
main unit
S.FMT
<SET>
Saved file type
selection mode
FILE
<SET>
Log cycle setting
mode
LOG
<SET>
<SET>
Calendar
mode
CAL
<SET>