KYMCO Grand Dink 250 Service Manual page 135

12
. COOLING SYSTEM
WATER PUMP SHAFT REMOVAL
Disconnect the water hose from the right
crankcase cover.
Remove the eight bolts attaching the right
crankcase cover.
Remove the water pump bearing snap ring
from the water pump assembly.
Remove the water pump shaft and inner
bearing.
Remove the water pump shaft outer
bearing.
12-11
Bolts
Water Pump Assembly
Water Pump Assembly
Snap Ring
Water Pump Assembly
GRAND DINK 250
Inner Bearing
Water Pump Shaft
Inner Bearing