KYMCO Grand Dink 250 Service Manual page 24

1
. GENERAL INFORMATION
CLUTCH, DRIVE AND DRIVEN PULLEYS
Engine starts but
motor-cycle does not
move
Motorcycle creeps or
engine starts but soon
stops or seems to rush
out (Rear wheel
rotates when engine
idles)
Engine lacks power at
start of a grade(poor
slope performance)
Engine lacks power at
high speed
There is abnormal
noise
or smell while running
Symptom
GRAND DINK 250
Probable Cause
ÅWorn or slipping drive belt
ÇBroken ramp plate
ÉBroken drive face spring
ÑSeparated clutch lining
ÖDamaged driven pulley shaft splines
ÜDamaged final gear
áSeized final gear
ÅBroken shoe spring
ÇClutch outer and clutch weight stuck
ÉSeized pivot
ÅWorn or slipping drive belt
ÇWorn weight rollers
ÉSeized drive pulley bearings
ÑWeak driven face spring
ÖWorn or seized driven pulley bearings
ÅWorn or slipping drive belt
ÇWorn weight rollers
ÉWorn or seized driven pulley bearings
ÅOil or grease fouled drive belt
ÇWorn drive belt
ÉWeak driven face spring
ÑWorn or seized driven pulley bearings
1-22