Emptying The Water Tank; Heat-Up Indicator; Fast Heat Up Indicator; Residual Heat - John Lewis JLBIOS618 User Manual

Emptying the water tank

Caution! Make sure that the
appliance is cool before you
start to empty the water
tank.
1. Prepare the draining pipe (C), included in the
same package with the user manual. Put the
connector (B) onto one of the ends of the
draining pipe.
A
B
C
2. Put the second end of the draining pipe (C)
into a container. Put it at a lower position than
the outlet valve (A).
3. Open the oven door and put the connector
(B) into the outlet valve (A).
4. Push the connector again and again when you
empty the water tank.
The tank can have some water
when the display shows: Water
required.
Wait until the water flow from
the water outlet valve stops.
5. Remove the connector from the valve when
the water stops flowing.
Do not use the drained water to fill
the water tank again.

Heat-up indicator

When you activate a heating function, the bar
on the display comes on. The bar shows that
the temperature increases.
18

Fast Heat Up Indicator

This function decreases the heat-up time.
To activate the function, hold
heat-up indicator alternates.

Residual heat

When you deactivate the appliance, the display
shows the residual heat. You can use the heat to
keep the food warm.
for 3 seconds. The
Steam oven User Manual