Cisco Catalyst 6500 Series Configuration Manual page 310

Catalyst 6500 series switch and cisco 7600 series router firewall services
Hide thumbs Also See for Catalyst 6500 Series:
Table of Contents

Advertisement

Installing Application or PDM Software
To session into the FWSM, enter the command for your operating system:
Step 2
For Cisco IOS software, enter the following command:
Router# session slot mod_num processor 1
For Catalyst operating system software, enter the following command:
Console> (enable) session mod_num
To log into the FWSM maintenance partition as root, enter the following command:
Step 3
Login: root
Step 4
Enter the password at the prompt:
Password:
By default, the password is "cisco."
To assign an IP address to the maintenance partition, enter the following command:
Step 5
root@localhost# ip address ip _address netmask
This address is the address for VLAN 1, which is the only VLAN used by the maintenance partition.
To assign a default gateway to the maintenance partition, enter the following command:
Step 6
root@localhost# ip gateway ip_address
Step 7
Optional) To ping the FTP server to verify connectivity, enter the following command:
root@localhost# ping ftp_address
Step 8
To download the application software from the FTP server, enter the following command:
root@localhost# upgrade ftp://[ user [: password ]@] server [/ path ]/ filename cf:{4 | 5}
cf:4 and cf:5 are the application partitions on the FWSM.
Follow the screen prompts during the upgrade.
The configuration file in the application partition is backed up and restored at the end of the upgrade
operation.
To log out of the maintenance partition, enter the following command:
Step 9
root@localhost# logout
To reboot the module into the application partition, cf:4 or cf:5, enter the command for your operating
Step 10
system:
For Cisco IOS, enter the following command:
Router# hw-module module mod_num reset cf:{4 | 5}
For Catalyst operating system software, enter the following command:
Console> (enable) reset mod_num boot cf:{4 | 5}
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
16-4
Chapter 16
Managing Software and Configuration Files
OL-6392-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7600 series

Table of Contents