Reloading A Security Context; Reloading By Clearing The Configuration; Reloading By Removing And Re-Adding The Context; Monitoring Security Contexts - Cisco Catalyst 6500 Series Configuration Manual

Reloading a Security Context

Reloading a Security Context
You can reload the context in two ways:
•
•
This section includes the following topics:
•
•

Reloading by Clearing the Configuration

To reload the context by clearing the context configuration, and reloading the configuration from the
URL, follow these steps:
Step 1 To change to the context that you want to reload, enter the following command:
FWSM# changeto context name
To access configuration mode, enter the following command:
Step 2
FWSM/ name # configuration terminal
To clear the running configuration, enter the following command:
Step 3
FWSM/ name (config)# clear configure all
This command stops the context from running.
To reload the configuration, enter the following command:
Step 4
FWSM/ name (config)# copy startup-config running-config
The FWSM copies the configuration from the URL specified in the system configuration. You cannot
change the URL from within a context.

Reloading by Removing and Re-adding the Context

To reload the context by removing the context and then re-adding it, follow the steps in the following
sections:
1.
2.

Monitoring Security Contexts

This section describes how to view and monitor context information, and includes the following topics:
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
5-24
Clear the running configuration and then import the startup configuration.
This action clears most attributes associated with the context, such as connections, and NAT tables.
Remove the context from the system configuration.
This action clears additional attributes, such as memory allocation, which might be useful for
troubleshooting. However, to add the context back to the system requires you to respecify the URL,
VLANs, and class membership.
Reloading by Clearing the Configuration, page 5-24
Reloading by Removing and Re-adding the Context, page 5-24
"Removing a Security Context" section on page 5-22
"Configuring a Security Context" section on page 5-19
Chapter 5 Managing Security Contexts
OL-6392-01