Detailed Information About Inspection Engines; Cuseeme Inspection Engine - Cisco Catalyst 6500 Series Configuration Manual

Catalyst 6500 series switch and cisco 7600 series router firewall services
Hide thumbs Also See for Catalyst 6500 Series:
Table of Contents

Advertisement

Chapter 13
Configuring Application Protocol Inspection
The following command assigns the port range from 1500 to 2000 to SQL*Net:
FWSM/contexta(config)# fixup protocol sqlnet 1500-2000

Detailed Information About Inspection Engines

CUSeeMe Inspection Engine

Enabled by default for UDP port 7648
Not Configurable
With CUSeeMe clients, one user can connect directly to another (CUSeeMe or other H.323 client) for
person-to-person audio, video, and data collaboration. CUSeeMe clients can conference in a mixed
client environment that includes both CUSeeMe clients and H.323-compliant clients from other vendors.
Behind the scenes, CUSeeMe clients operate in two different modes. When connected to another
CUSeeMe client or CUSeeMe Conference Server, the client sends information in CUSeeMe mode.
When connected to an H.323-compliant videoconferencing client from a different vendor, CUSeeMe
clients communicate using the H.323-standard format in H.323 mode.
CUSeeMe is supported through H.323 inspection, as well as performing NAT on the CUSeeMe control
stream, which operates on UDP port 7648.
OL-6392-01
CUSeeMe Inspection Engine, page 13-5
DNS over UDP Inspection Engine, page 13-6
FTP Inspection Engine, page 13-6
H.323 Inspection Engine, page 13-7
HTTP Inspection Engine, page 13-10
ICMP Inspection Engine, page 13-10
ICMP Error Inspection Engine, page 13-11
ILS Inspection Engine, page 13-11
MGCP Inspection Engine, page 13-12
NetBios Name Service Inspection Engine, page 13-14
OraServ Inspection Engine, page 13-14
RealAudio Inspection Engine, page 13-14
RSH Inspection Engine, page 13-15
RTSP Inspection Engine, page 13-15
SIP Inspection Engine, page 13-16
Skinny Inspection Engine, page 13-18
SMTP Inspection Engine, page 13-19
SQL*Net Inspection Engine, page 13-20
Sun RPC Inspection Engine, page 13-21
TFTP Inspection Engine, page 13-21
XDMCP Inspection Engine, page 13-22
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
Detailed Information About Inspection Engines
13-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

7600 series

Table of Contents