Example 4: Primary Fwsm Configuration - Cisco Catalyst 6500 Series Configuration Manual

Routed Mode Examples
Figure B-4
209.165.201.3
See the following sections for the configurations for this scenario:
•
•
•

Example 4: Primary FWSM Configuration

The following sections include the configuration for the primary FWSM:
•
•
•
•
Example 4: System Configuration (Primary)
You must first enable multiple context mode using the mode multiple command. Then enter the
activation key to allow more than two contexts using the activation-key command. The mode and the
activation key are not stored in the configuration file, even though they do endure reboots. If you view
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
B-12
Example 4
VLAN 100
Active Switch
MSFC
HSRP IP:
209.165.201.5
VLAN 200
209.165.201.2
209.165.201.4
Primary
FWSM
10.0.1.1 10.0.3.1
10.0.2.1
VLAN 201
VLAN 202
VLAN 203
Example 4: Primary FWSM Configuration, page B-12
Example 4: Secondary FWSM System Configuration, page B-14
Example 4: Switch Configuration, page B-14
Example 4: System Configuration (Primary), page B-12
Example 4: Context A Configuration (Primary), page B-13
Example 4: Context B Configuration (Primary), page B-13
Example 4: Context C Configuration (Primary), page B-14
Internet
Standby Switch
209.165.201.7
Failover Links:
VLAN 10
Trunk:
VLANs 200, 201,
VLAN 11
202, 203, 10, 11
10.0.1.2
Context A
Context B
Context C
Appendix B Sample Configurations
MSFC
HSRP IP:
209.165.201.5
209.165.201.6
209.165.201.8
Secondary
FWSM
10.0.3.2
10.0.2.2
OL-6392-01