HIKVISION DS-7104HGHI-SH User Manual page 96

To edit HDD property, you need to set the storage mode of the HDD to Group. See Chapter 12.4 Managing HDD
Group.
Steps:
1. Enter HDD setting interface.
Menu> HDD
2. Click to edit the HDD you want to protect.
3. Set the HDD to Read-only.
4. Click OK to save settings and back to the upper level menu.
 You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the property
to R/W.
 If there is only one HDD and is set to Read-only, the DVR cannot record any files. Only live view mode is
available.
 If you set the HDD to Read-only when the DVR is saving files in it, then the file will be saved in next R/W
HDD. If there is only one HDD, the recording will be stopped.
Digital Video Recorder User Manual
Figure 5. 31 HDD General
Figure 5. 32 HDD General- Editing
95