Face Detection - HIKVISION DS-7104HGHI-SH User Manual

Purpose:
The DS-7200/7300/8100/9000 series DVR can receive the VCA alarm (line crossing detection, intrusion
detection, sudden scene change detection and audio exception detection) sent by analog camera, and the VCA
detection must be enabled and configured on the camera settings interface first. All other VCA detection features
must be supported by the connected IP camera.
 One analog camera
DS-7200/7300/8100/9000HQHI models support the VCA settings and VCA alarm of line crossing detection,
intrusion detection, sudden scene change detection and audio exception detection.
 DS-7100-SH does not support all VCA detection.

9.1 Face Detection

Purpose:
Face detection function detects the face appears in the surveillance scene, and some certain actions can be taken
when the alarm is triggered.
Steps:
1. Enter the VCA settings interface.
Menu > Camera > VCA
2. Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured pictures of VCA detection.
3. Select the VCA detection type to Face Detection.
4. Click to enter the face detection settings interface. Configure the trigger channel, arming schedule and
linkage action for the face detection alarm. Please refer to step3~step5 of Chapter 9.1 Setting Motion
Detection Alarm for detailed instructions.
5. Click the Rule Settings button to set the face detection rules. You can click-and-drag the slider to set the
detection sensitivity.
Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be detected.
Digital Video Recorder User Manual
of DS-7200/7300/8100HGHI
Figure 9. 1 Face Detection
135
models and two analog cameras of