HIKVISION DS-7104HGHI-SH User Manual page 78

Hide thumbs Also See for DS-7104HGHI-SH:
Table of Contents

Advertisement

1) Select the Record tab to configure.
2) Select a camera number in the camera dropdown list.
You can configure the stream type, the resolution, the video quality and other parameters on demand for
Main Stream (Continuous) and Main Stream (Event) respectively.
The resolution of 1920*1080 (1080p Lite) is supported by the DS-7200HQHI-E1/E2 models only.
Please refer to the Appendix-Specifications for the supported resolutions of different models.
3.
Click More Settings to configure more parameters.
Figure 5. 4 More Settings of Record Parameters
Pre-record: The time you set to record before the scheduled time or event. For example, when an
alarm triggered the recording at 10:00, if you set the pre-record time as 5 seconds, the camera
records it at 9:59:55.
Post-record: The time you set to record after the event or the scheduled time. For example, when
an alarm triggered the recording ends at 11:00, if you set the post-record time as 5 seconds, it
records till 11:00:05.
Expired Time: The time for keeping the record files in the HDDs, once exceeded, the files will be
deleted. The files will be saved permanently if the value is set as 0. The actual keeping time for the
files should be determined by the capacity of the HDDs.
Redundant Record: Enabling redundant record means you save the record in the redundant
HDD. See Chapter 5.8 Configuring Redundant Recording.
Record Audio: Enable this feature to record the sound and disable it to record the video without
sound.
Video Stream: Main stream and sub-stream are selectable for recording. When you select
sub-stream, you can record for a longer time with the same storage space.
Enable 960 Mode: The option is supported by analog cameras. Enabling the 960 mode to enable
the WD1 resolution for the main stream, otherwise, the resolution supports up to 4CIF. And the
option does not supported by TVI cameras, while the WD1 resolution is available all the time.
The Redundant Record option is only available when the HDD mode is Group.
Digital Video Recorder User Manual
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents