Sudden Scene Change Detection; Defocus Detection; Pir Alarm - HIKVISION DS-7104HGHI-SH User Manual

environment sound, the higher the value should be. You can adjust it according to the real environment.
3) Check the checkbox of Sudden Decrease of Sound Intensity Detection to detect the sound steep drop
in the surveillance scene. You can set the detection sensitivity [1-100] for sound steep drop.
6. Click Apply to activate the settings.

9.14 Sudden Scene Change Detection

Purpose:
Scene change detection function detects the change of surveillance environment affected by the external factors;
such as the intentional rotation of the camera, and some certain actions can be taken when the alarm is triggered.
 The sudden scene change detection is not supported by the 7104/7204/7304/8104HGHI-SH and
7324HGHI-SH series DVR.
 The sudden scene change detection and the VCA (intrusion detection and line crossing detection) cannot be
enabled at the same channel.
 Please refer to the Chapter 9.2 Face Detection for operating steps to configure the scene change detection.
 The Sensitivity in the Rule Settings ranges from 1 to 100, and the higher the value is, the more easily the
change of scene can trigger the alarm.

9.15 Defocus Detection

Purpose:
The image blur caused by defocus of the lens can be detected, and some certain actions can be taken when the
alarm is triggered.
 Please refer to the Chapter 9.2 Face Detection for operating steps to configure the defocus detection.
 The Sensitivity in the Rule Settings ranges from 1 to 100, and the higher the value is, the more easily the
defocus image can trigger the alarm.

9.16 PIR Alarm

Purpose:
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's field of view. The heat
energy dissipated by a person, or any other warm blooded creature such as dogs, cats, etc., can be detected.
Steps:
1. Enter the VCA settings interface.
Menu> Camera> VCA
2. Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured pictures of VCA detection.
3. Select the VCA detection type to PIR Alarm.
Digital Video Recorder User Manual
145