Initializing Hdds - HIKVISION DS-7104HGHI-SH User Manual

12.1 Initializing HDDs

Purpose:
A newly installed hard disk drive (HDD) must be initialized before it can be used with your DVR.
Steps:
1. Enter the HDD Information interface.
Menu > HDD>General.
2. Select HDD to be initialized.
3. Click the Init button.
4. Select the OK button to start initialization.
5. After the HDD has been initialized, the status of the HDD will change from Uninitialized to Normal.
Digital Video Recorder User Manual
Figure 12. 1 HDD Information Interface
Figure 12. 2 Confirm Initialization
Figure 12. 3 Start Initialization
Figure 12. 4 HDD Status Changes to Normal
176