HIKVISION DS-7104HGHI-SH User Manual page 21

No. Name
MAIN/SPOT/Z
F1/ LIGHT
MENU/WIPER
PREV/FOCUS-
8 IR Receiver
9 DVD-R/W
No. Name
ALARM
READY
STATUS
1
HDD
MODEM
Tx/Rx
Digital Video Recorder User Manual
Function Description
Adjusts the iris of the camera in PTZ control mode.
Generates video clips for backup in playback mode.
Enters/exits the folder of USB device and eSATA HDD.
Switches between main and spot output.
OOM- Zooms out the image in PTZ control mode.
Selects all items on the list when used in a list field.
Turns on/off PTZ light (if applicable) in PTZ control mode.
Switches between play and reverse play in playback mode.
Cycles through tab pages.
F2/ AUX
Switches between channels in synchronous playback mode.
Returns to the Main menu (after successful login).
Presses and holds the button for five seconds to turn off audible key
beep.
Starts wiper (if applicable) in PTZ control mode.
Shows/hides the control interface in playback mode.
Switches between single screen and multi-screen mode.
Adjusts the focus in conjunction with the A/FOCUS+ button in PTZ
control mode.
Enters the PTZ Control mode.
PTZ/IRIS-
Adjusts the iris of the PTZ camera in PTZ control mode.
Receiver for IR remote control.
Slot for DVD-R/W.
Figure 1. 7 Front Panel of DS-9000HQHI-SH
Table 1. 6 Description of Control Panel Buttons
Function Description
Turns red when a sensor alarm is detected.
Turns green, indicating that the DVR is functioning properly.
Turns blue when device is controlled by an IR remote.
Turns red when controlled by a keyboard and purple when IR remote and
keyboard is used at the same time.
Flickers in red when data is being read from or written to HDD.
Flickers in green when network connection is functioning properly.
Turns blue when the device is in armed status; at this time, an alarm is
enabled when an event is detected.
20