Playing Back By Event Search - HIKVISION DS-7104HGHI-SH User Manual

Button Operation
 The
 represents normal recording (manual or schedule);
motion | alarm, motion & alarm).
 Playback progress bar: use the mouse to click any point of the progress bar to locate special frames.

6.1.3 Playing Back by Event Search

Purpose:
Play back record files on one or several channels searched out by restricting event type (motion detection, alarm
input or VCA). Channel switch is supported.
 Playback by alarm input search is not supported by DS-7100, DS-7200HGHI and DS-7200HQHI-E1/E2
series DVR.
 DS-7100 does not support VCA type.
Steps:
1. Enter the playback interface.
Menu>Playback
2. Click
3. Select Alarm Input, Motion, Line Crossing Detection, Intrusion Detection as the event type, and specify
the start time and end time for search.
4. Click Search, and the record files matching the search conditions will be displayed on a list.
5. Select and click
You can click Back to return to the search interface.
If there is only one channel triggered, clicking
channel.
Digital Video Recorder User Manual
Button
indicates the start time and end time of the record files.
and select to enter the Event Playback interface.
Figure 6. 5 Video Search by Motion Detection
button to play back the record files.
101
Operation Button
represents event recording (motion, alarm,
button takes you to Full-screen Playback interface of this
Operation
time line