Playing Back By Event Search - HIKVISION DS-7104HWI-SL User Manual

play
Previous file
Hide toolbar

Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to
locate special frames.

About video type bar:
recording (motion);

6.1.4 Playing Back by Event Search

Purpose:
Play back record files on one or several channels searched out by restricting event type (motion detection).
Channel switch is supported.
Steps:
1. Enter the playback interface.
Menu>Playback
2. Select Event tab to enter the Event Playback interface.
3. Select Motion as the event type.
4. Set the start time and end time of the record files.
5. Select the camera (s) for searching.
6. Click Search button to enter the Search Result interface.
The Pre-play and post-play can be configured. The Pre-play refers to the time configured before the
defined start time of event search, and the Post-play refers to the time configured after the defined end
time of event search. For example, when the start time and end time of event search are set to 12:00:00 -
13:00:00, and the pre-play and post-play time is set to 30s and 20s respectively, then the actual playback
of event video file is 11:59:30 ~ 13:00:20.
User Manual of Digital Video Recorder
Next file
Progress bar
represents normal recording (manual or schedule);
represents smart search recording.
Figure 6. 16 Video Search by Motion
71
Video search
Video type
bar
represents event
Exit