change the clock function.
of the clock functions, or wait 5
seconds for the setting to be
6.1 Setting the DURATION or
nal sounds for 2 minutes after the
time setting flash in the display. The
Press any button or open the oven
door to stop the acoustic signal.
If you press
hours for DURATION
appliance goes to setting of the
6.2 Setting the MINUTE
TIME OF DAY
again and again to
to confirm the settings
again and again until the
flashes in the display.
to the set minutes.
to set the hour.
to confirm. An acoustic sig-
when you set the
To set, change or check the time of day. Refer to
"Setting the time".
To set how long the appliance must operate. First
set an oven function before you set this function.
To set when the appliance must be deactivated.
First set an oven function before you set this func-
tion. You can use Duration and End at the same
time (Time Delay) to set the time when the appli-
ance must be activated and then deactivated.
6.3 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on immedi-
ately when the oven starts to heat.
To reset the Count Up Timer, press and
and "00" flash in the display.
to set the MINUTE
MINDER. At first, the time is calcula-
ted in minutes and seconds. When
the time you set is longer than 60
minutes, the symbol
the display. The appliance now cal-
culates the time in hours and mi-
The MINUTE MINDER starts auto-
matically after five seconds.
After 90% of the set time, an
acoustic signal sounds. Press a
button to stop the signal.
When the set time ends, an acoustic
signal sounds for two minutes.
flash in the display.
Press a button to stop the signal.
If you set the MINUTE MINDER
when the DURATION or END
function operates, the symbol
comes on in the display.
You cannot use the Count Up
Timer when Duration or End
comes on in