Count Up Timer; Setting The Duration; Setting The End - AEG BP730402K User Manual

7.2 Count Up Timer

The Count Up Timer is not
activated if Duration and
End are set.
The Count Up Timer starts to count when
the appliance starts to heat.
1. To reset the Count Up Timer, touch
again and again until
the display.
2. Touch until the display shows
"00:00" and the Count Up Timer
starts to count up again.

7.3 Setting the DURATION

1. Activate the appliance and set an
oven function and temperature.
2. Touch again and again until the
display shows
flashes in the display.
3. Use or to set the minutes for
DURATION.
4. Touch to confirm.
5. Use or to set the hours for
DURATION.
If you touch
while you set the
DURATION, the
appliance switches to
the setting of the END
function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display.
The appliance deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Deactivate the appliance.

7.4 Setting the END

1. Activate the appliance and set an
oven function and temperature.
2. Touch
again and again until the
display shows
flashes in the display.
flashes in
.
or
.
3. Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the display.
The appliance deactivates.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Deactivate the appliance.
7.5 Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a
programme) and temperature (refer
to "Setting the oven function" and
"Changing the temperature").
2. Set the DURATION (refer to "Setting
the DURATION").
3. Touch again and again until
flashes in the display.
4. Touch
to set the SET+GO
function.
The display shows
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
7.6 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 23 h 59 min). This
function has no effect on the operation
of the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1. Touch .
and "00" flash in the display.
2. Use or to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3. Touch and
to reset the set time.
4. Touch
or the MINUTE MINDER
starts automatically after five
seconds.
ENGLISH 13
symbol
and with an
at the same time