Setting The End; Count Up Timer - AEG DCK731110M User Manual

3. Use or to set the minutes for
DURATION time.
4. Touch or the DURATION time
starts automatically after 5 seconds.
5. Use
or to set the hours for
DURATION time.
6. Touch . The DURATION time
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes.
setting flash in the display. The appliance
deactivates.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Turn off the appliance.

7.4 Setting the END

1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use
or to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION.
4. Touch .
5. Use
or to set the hours for
DURATION.
6. Touch , the appliance switches to
the setting of the END function.
The display shows flashing
7. Use
minutes and then the hours.
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
the display. The appliance deactivates
automatically.
and time
8. Touch a sensor field or open the
oven door to stop the acoustic
signal.
9. Turn off the appliance.
7.6 Setting the MINUTE
MINDER
1. Touch
and "00" flash in the display.
and the
2. Use
First you set the seconds, then the
minutes and the hours.
3. Use
MINDER and
4. Touch
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes and 00:00
and
5. Touch a sensor field or open the
oven door to stop the acoustic
signal.

7.7 COUNT UP TIMER

1. To reset the Count Up Timer, touch
the display.
2. Touch
"00:00" and the Count Up Timer
. starts to count up again.
or to set the END and
or to confirm. First you set the
and the time setting flash in
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
with a dot and
dot shows which clock
function is on in the Clock /
residual heat display.
.
to switch between options.
or to set the MINUTE
to confirm.
or the MINUTE MINDER
flash in the display.
again and again until
until the display shows
ENGLISH 13
. The
flashes in