Download  Print this page

What To Do If; Installation - AEG BE5013001 User Manual

Hide thumbs

Advertisement

Table of Contents

11. WHAT TO DO IF...

WARNING!
Refer to the Safety chapters.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The appliance does not
heat up.
The lamp does not oper-
ate.
The display shows an er-
ror code that is not on
this list.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. INSTALLATION

WARNING!
Refer to the Safety chapters.
Problem
Possible cause
The appliance is deacti-
vated.
The clock is not set.
The necessary settings
are not set.
The automatic cut-out is
activated.
The fuse is released.
The lamp is defective.
There is an electrical
fault.
on the front frame of the appliance cavi-
ty.
Remedy
Activate the appliance.
Set the clock. Refer to
"Setting the clock".
Make sure that the set-
tings are correct.
Refer to "Automatic
switch-off".
Make sure that the fuse
is the cause of the mal-
function. If the fuse re-
leases again and again,
contact a qualified elec-
trician.
Replace the lamp.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
the error code again,
contact the Customer
Care Department.
.........................................
.........................................
.........................................
The built-in unit must meet the
stability requirements of DIN
68930.
ENGLISH
29

Advertisement

Table of Contents
loading

  Also See for AEG BE5013001