Table of Contents
Advertisement
iBoot-G2 setup section consists of several pages. Access any page via the buttons on the left of the page.
Each time a setting is changed click on the Save button for that page to save the changes before moving
to the next page.
7.1.
Device Settings
Device Name:
Set a 20 Character name to be
displayed on the top of the Home page. This assists
in identifying which iBoot-G2 is being accessed.
Cycle Time: 0 to 999 seconds power cycle time. This
is the length of time the power will be off during a
reboot, or on during a power burst.
7.2.
Network Settings
IP Mode:
Select Static to set the IP address using
the fields below, or DHCP to allow a DHCP server to
set the IP Address.
IP address: Enter a static IP address. This will be
automatically set if using DHCP
Subnet Mask: Enter the Subnet Mask. This will be
automatically set if using DHCP
Gateway:
Enter the Gateway.
automatically set if using DHCP
HTTP Port: This setting is used to allow access to
iBoot-G2 on a port other than the Web standard Port
80. If the port is changed, you will need to identify the
port number when you enter iBoot's IP address into
your browser. If the new port is 9105 then use the
address http://192.168.1.254:9105.
Telnet Port: This setting is used to allow access to the iBoot-G2 via telnet by ports other than standard 23.
DxP Port: This setting is used to allow access to the iBoot-G2 via Dataprobe Exchange Protocol (DxP) via
ports other than standard 9100.
Auto Logout: This setting sets the automatic logout for inactivity on both the web and telnet users. It can
be set from 0 to 99 minutes. 0 disables the Auto Logout feature. See caution on page 8.
Note:
All of the TCP/IP Settings require a reboot of the iBoot-G2, after clicking Save. A Reboot button
will appear at the bottom of the page. The new settings will not take effect until the unit is rebooted.
Reboot will not affect the power position of the iBoot-G2. Upon Clicking Reboot, the Googbye page is
displayed with a link to re-login.
V110120E
7. Web Setup
This will be
iBoot-G2
Device Setup Page
Network Setup Page
Page 10
Hide quick links:
Advertisement
Table of Contents
