Table of Contents
Advertisement
and | or>
set autoping action <none | on-
latch | on-follow | off-latch | off-
follow | cycle | cycle-once>
User Commands
set password <user | admin>
<old> <new> <repeat>
Event Commands
get events
set time server <dotted
decimal>
set time enable <yes | no>
get time
set event <1-8> date
<mm/dd/yyyy>
set event <1-8> time <hh:mm>
set event <1-8> repeat <never
| hourly | daily | weekly |
monthly | annually>
set event <1-8> action <on |
off | cycle | reboot>
del event <1-8>
V110120E
relationship And or Or.
This command is used to set the action that the iBoot-G2 will
perform when the autoping triggers.
These commands are only available to the administrator.
This command is used to set the password of either the user
or administrator.
These commands are only available to the
administrator.
This command displays all scheduled events as shown below. Example:
Name
Date
1. Event Name
mm/dd/yyyy
2. Event Name
mm/dd/yyyy
3. Event Name
mm/dd/yyyy
4. Event Name
mm/dd/yyyy
5. Event Name
mm/dd/yyyy
6. Event Name
mm/dd/yyyy
7. Event Name
mm/dd/yyyy
8. Event Name
mm/dd/yyyy
This command is used to set the IP Address of a network
time server.
This command enables or disables the use of the time server
and scheduled events.
Displays the current time and time server
Current Time: 16:10:41
01/27/2010
Server:
64.90.182.55
This command is used to set the scheduled action's start
date.
This command is used to set the time the scheduled action
will occur in 24 hour format.
This command is used to set how often the scheduled action
will repeat.
This command is used to set the scheduled action.
This command deletes the scheduled action.
iBoot-G2
Time
Repeats
Action
hh:mm
Annually
Power On
hh:mm
Annually
Power On
hh:mm
Annually
Power On
hh:mm
Annually
Power On
hh:mm
Annually
Power On
hh:mm
Annually
Power On
hh:mm
Annually
Power On
hh:mm
Annually
Power On
None
user
admin
69.90.182.55
No
Page 16
Hide quick links:
Advertisement
Table of Contents
