Loading Paper In Tray 1 (Mpt) For 2-Sided Printing - Xerox Phaser 5550 User Manual

5.
6.

Loading Paper in Tray 1 (MPT) for 2-Sided Printing

All standard paper sizes, except postcard, B6 JIS, and envelopes, and most custom paper sizes
can be used in Tray 1 (MPT) for 2-sided printing.
Caution:
paper in a tray, you must change the paper
type and size on the control panel to match
the paper that you loaded. If you fail to do
this, print-quality problems or jams can
occur, and the fuser can be damaged.
1.
Downloaded From ManualsPrinter.com Manuals
If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a. Select
Change setup
b.
Select the paper type, and then press the OK button to save your selection.
In the printer driver, select either the paper type or Tray 6 as the paper source.
If you change the type or size of
Lower Tray 1 (MPT).
and then press the OK button.
Phaser® 5550 Printer
4-20
Loading Paper
5550-123
5550-262