Xerox Phaser 5550 User Manual page 103

2.
3.
4.
Downloaded From ManualsPrinter.com Manuals
■ Insert Small US postcards short-edge feed and facedown into Tray 1 (MPT) only.
Place the top of the postcard toward the rear of the printer.
Envelope Tray
Insert Large US and A6 postcards long-edge feed and faceup into the optional
■
Envelope Tray. Place the top of the postcard toward the left of the tray.
Adjust the paper guides to the size of the postcards.
If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a. Select
Change setup
b. Select , and then press the OK button.
Card Stock
c. Select the paper size, and then press the OK button to save your selection.
In the printer driver, select Card Stock as the paper type, or Tray 1 (MPT) or Tray 2 as
the paper source.
, and then press the OK button.
Phaser® 5550 Printer
4-42
Printing on Specialty Media
5550-257
5550-278