Xerox Phaser 5550 User Manual page 100

Printing Envelopes from Tray 1 (MPT)
1.
Short-Edge Feed – C4 and Some Custom
2.
3.
4.
Downloaded From ManualsPrinter.com Manuals
Insert the envelopes in Tray 1 (MPT):
Place C4 envelopes short-edge feed in the tray.
■
■ Place Monarch, #10, C5, and DL envelopes long-edge feed in the tray.
■ Place the side to be printed facedown.
■ Place the envelope with the flap entering the printer first.
Sizes
Adjust the paper guides to the size of the envelopes.
If prompted on the control panel, press the OK button to accept the envelope size that is
highlighted. If you have changed the paper size or type, do the following:
a.
Select
Change setup
b.
Select Envelope , and then press the OK button.
c. Select the paper size, and then press the OK button to save your selection.
In the printer driver, select Envelope as the paper type or Tray 1 (MPT) as the paper
source.
5550-144
Long-Edge Feed – All Other Sizes
, and then press the OK button.
Phaser® 5550 Printer
4-39
Printing on Specialty Media
5550-145