Operational Guidelines; Printing Safety Guidelines; Printer Supplies - Xerox Phaser 5550 User Manual

Operational Guidelines

■
■
■
■
■
■

Printing Safety Guidelines

■
■
■
■
■
Warning:
These areas may be very hot and can cause personal injury.

Printer Supplies

■
■
Downloaded From ManualsPrinter.com Manuals
Do not block or cover the slots and openings on the printer. The printer may overheat
without adequate ventilation.
For optimum performance, use the printer at elevations below 3,000 m (11,480 ft.).
Do not place the printer near a heat source.
Do not place the printer in direct sunlight.
Do not place the printer in line with the cold air flow from an air conditioning system.
Place the printer on a level, solid non-vibrating surface with adequate strength for the
weight of the printer. It should be within 2° of horizontal with all four feet in solid contact
with the surface. The base printer weight without any packaging materials is
approximately 41 kg (90 lb.).
Wait 10 to 15 seconds between turning the printer off and on.
Keep hands, hair, neckties, etc. away from the exit and feed rollers.
Do not remove the paper source tray that you selected in either the printer driver or control
panel.
Do not open the doors.
Do not move the printer.
Avoid touching areas inside the printer that are labeled with a warning symbol.
Use the supplies specifically designed for your printer. The use of unsuitable materials
may cause poor performance and a possible safety hazard.
Follow all warnings and instructions marked on, or supplied with, the printer, options and
supplies.
Phaser® 5550 Printer
1-7
Operational Safety