Accessing The Startup Page - Xerox Phaser 5550 User Manual

Accessing the Startup Page

The printer can produce a Startup Page each time the printer is turned on or reset. The factory
default is Off. You can turn on automatic printing of the Startup Page or print it from the
Information Pages
To turn on/off the Startup Page use either:
■
■
Using the Control Panel
To turn on/off the Startup Page:
1.
2.
3.
Using CentreWare IS
To turn on/off the automatic printing of the Startup Page:
1.
2.
3.
4.
5.
6.
7.
Printing the Startup Page Using the Control Panel
To print the Startup Page:
1.
2.
3.
Downloaded From ManualsPrinter.com Manuals
menu.
The printer's control panel
CentreWare IS
Select , and then press the OK button.
Printer Setup
Select , and then press the OK button.
Printer Controls
The is highlighted. The end of the line displays the setting (
Startup Page
Press the OK button to change the setting.
Launch your web browser.
Enter your printer's IP address in the browser's Address field.
Select Properties.
Select the General folder on the left navigation panel.
Select Printer Defaults.
Select Off or On from the Printer Startup Page drop-down list to change the setting.
Click Save Changes at the bottom of the page.
Select , and then press the OK button.
Information
Select
Information Pages
Select Startup Page , and then press the OK button to print.
, and then press the OK button.
Phaser® 5550 Printer
5-4
Printer Settings
or ).
On Off