Operational Safety; Printer Location; Printer Clearance - Xerox Phaser 5550 User Manual

Operational Safety

Your printer and supplies were designed and tested to meet strict safety requirements. These
include safety agency examination, approval, and compliance with established environmental
standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation
of your printer.

Printer Location

Place the printer in a dust-free area within a temperature range of 41° F to 90° F (5° C to
32° C) and a relative humidity range of 15 percent to 85 percent.

Printer Clearance

Place the printer in an area where there is adequate space for ventilation, operation, and
servicing. The recommended minimal spacing is:
Overhead Clearance
■
■
Total Height Requirements
■
■
Other Clearances
■
■
■
■
■
■
Downloaded From ManualsPrinter.com Manuals
30 cm (12 in.) above the printer without the finisher/stacker
47 cm (18.5 in.) above the printer with the finisher/stacker
Printer: 74 cm (29 in.)
Add 29 cm (11.5 in.) for the 1000-sheet feeder
20 cm (8 in.) behind the printer
46 cm (18 in.) in front of the printer
64 cm (25.2 in.) on the left side of the printer
64 cm (25.2 in.) on the left side of the printer with 2000-sheet feeder
20 cm (8 in.) on the right side of the printer
100 cm (39.4 in.) on the right side of the printer with the finisher/stacker
Phaser® 5550 Printer
1-6

Operational Safety