Xerox Phaser 5550 User Manual page 172

3.
4.
Downloaded From ManualsPrinter.com Manuals
If the paper size shown on the control panel does not match the size of the paper in the
tray, do the following:
a. Select
Change Paper Size
b.
Select Auto Sensed, Custom
c. If you selected
Custom
, press the OK button, scroll to the width of the paper, and then press the
Width
OK button. Select Custom Height
paper, and then press the OK button.
Open Door A.
Warning: Use caution; some components inside Door A may by hot.
, and then press the OK button.
, or a listed paper size, and then press the OK button.
, specify the width and height of the paper. Select
, press the OK button, scroll to the height of the
Phaser® 5550 Printer
6-28
Clearing Paper Jams
Custom
5550-001