Loading Paper In Trays 2-5 For Single-Sided Printing - Xerox Phaser 5550 User Manual

5.
6.

Loading Paper in Trays 2-5 for Single-Sided Printing

Trays 2-5 can be used for all paper, transparencies, specialty media, and many sizes.
Caution:
a tray, you must change the paper type on the
control panel to match the paper that you
loaded. If you fail to do this, print-quality
problems can occur and the fuser can be
damaged.
Downloaded From ManualsPrinter.com Manuals
■ Place pre-punched paper with the holes toward the back of the printer.
■ Place letterhead (or the top of the page) to enter the printer last.
If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a. Select
Change setup
b. Select the paper type, and then press the OK button.
c. Select the paper size, and then press the OK button to save your selection.
In the printer driver, select either the paper type or Tray 1 (MPT) as the paper source.
If you change the type of paper in
, and then press the OK button.
Phaser® 5550 Printer
4-13
Loading Paper
5550-138
5550-123