Page 1
FIRMWARE UPDATING PROCEDURE IMPORTANT NOTICE Do not attempt to update your Yamaha receiver using any other data file except those provided directly from the Yamaha website or through your network connection. Follow the instructions carefully and do not attempt any other procedures not specified in the instructions provided by Yamaha.
Firmware Update Through the Internet Requirement: Internet connection Your receiver is connected to the Internet if you can receive Internet radio stations. (See owner’s manual for details) Power off the receiver (Standby mode) Enter the ADVANCED SETUP mode While pressing the STRAIGHT key, press the MAIN ZONE key and keep STRAIGHT key pressed until “...
Page 3
Check the updated firmware version a. Power on the AV receiver and press the ON SCREEN key on the remote control. b. Select “Information” > “System”. c. Confirm that the firmware version is updated to the latest version. ON SCREEN key Congratulations! You have completed the firmware update.
USB thumb drive, with enough free space to store the firmware. (File system with FAT16 or FAT32 format) Firmware file provided by YAMAHA, “R0411-xxxx.bin”. Prepare USB thumb drive for the update Download the firmware, unzip and copy “R0411-xxxx.bin” into the root directory of the USB thumb drive.
Page 5
Start firmware update a. Press INFO (WPS) key to start the update. (Update process may take up to 10 minutes) If “ ” appears, this means your receiver is already up-to-date. In this case, power off to UPDATE SUCCESS exit from Advanced Setup. Your AV receiver is ready for normal use. Firmware update in progress Caution DO NOT interrupt power during the update.
Page 6
Troubleshooting CASE 1 Error message appeared during the update For some reason, the receiver can’t read the firmware data. Cause: Method: For your solution, check the following [Update through Internet] ❏ Check Internet connection. Your Internet connection is working by playing an Internet radio station. (See owner’s manual for details) [Update by USB thumb drive] ❏...