Standby Through - Yamaha RX-A3060 Owner's Manual

ARC
Enables/disables ARC (p.180) when "HDMI Control" is set to "On".
Settings
Off Disables ARC.
On Enables ARC.
Y
You do not need to change this setting normally. In case noises are produced from the speakers connected to the
unit because TV audio signals input to the unit via ARC are not supported by the unit, set "ARC" to "Off" and use
the TV's speakers.
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the unit when
"HDMI Control" is set to "On".
Settings
Off Does not set the unit to standby mode when the TV is turned off.
On Sets the unit to standby mode when the TV is turned off.
Sets the unit to standby mode when the TV is turned off only when the unit is
Auto
receiving TV audio or HDMI signals.
⬛
Audio Output
Selects a device to output audio.
X
• The "Amp" and "HDMI OUT1" settings are available only when "HDMI Control" is set to "Off".
• The "HDMI OUT2" setting is available only when "HDMI OUT2 Assign" (p.147) is set to "Main".
Amp
Enables/disables the audio output from the speakers and headphones connected to the unit.
Settings
Off Disables the audio output from the speakers and headphones.
On Enables the audio output from the speakers and headphones.
HDMI OUT1, HDMI OUT2
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or HDMI OUT
2 jack.
Settings
Off Disables the audio output from the TV.
On Enables the audio output from the TV.
Y
The HDMI OUT 1-2 jacks output 2-channel audio signals when the unit is turned on.
⬛

Standby Through

Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in
standby mode. If this function is set to "On" or "Auto", you can use the input selection keys (AV
1-7 and V-AUX) to select an HDMI input even when the unit is in standby mode (the standby
indicator on the unit blinks).
Settings
(This setting is available only when "HDMI Control" is set to "Off".)
Off
Does not output videos/audio to the TV.
Outputs videos/audio to the TV.
On
(The unit consumes more power than when "Off" is selected.)
Outputs videos/audio to the TV. If no signals are detected, the unit is set to the
Auto
power saving mode.
141
En