Controlling External Devices With The Remote Control; Registering The Remote Control Code For A Tv - Yamaha RX-A3060 Owner's Manual

SOURCE
You can use the unit's remote control to operate external devices (such
SOURCE RECEIVER RECEIVER
as BD/DVD players) if you have registered the remote control code of the
AV AV
1 1 2 2 3 3 4 4
external device.
5 5 6 6 7 7 V-AUX V-AUX
Y
AUDIO AUDIO
1 1 2 2 3 3
PHONO PHONO
• You cannot control an external device that does not have a remote control sensor.
TUNER TUNER BLUETOOTH BLUETOOTH USB USB NET NET
• Ensure that the remote control ID of the external device is set to "ID1". If any other ID
MAIN MAIN 2 3 4 2 3 4
PARTY PARTY HDMI OUT HDMI OUT
ZONE ZONE
SCENE SCENE
• If the unit's remote control is without batteries for more than 2 minutes, the
1 1 2 2 3 3 4 4
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
X
Under the unit's default settings, the amplifier code (Yamaha: 5098) is set for all the
TOP MENU TOP MENU POP-UP/MENU POP-UP/MENU
input selection keys. With this setting, you can control HDMI Control-compatible
ON ON
OPTION OPTION
SCREEN SCREEN
devices connected to the unit with the remote control. (This function may not work
depending on the specification of the external device.)
ENTER ENTER
RETURN RETURN DISPLAY DISPLAY
Registering the remote control code for a
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
TV
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
You can use the unit's remote control to operate a TV if you have
1 2 3 4
registered its remote control code.
Numeric keys
5
6 7 8
MEMORY
X
9 0 10 ENT
TV
TV operation keys
INPUT
You can also register your TV's remote control code to the unit's input selection keys
TV z
TV VOL TV CH
MUTE CODE SET
(p.158). This would allow you to use the cursor keys or numeric keys to operate the TV
CODE SET
(this function may not be available on some TV models).

Controlling external devices with the remote control

is selected, the remote control operations may not work properly.
registered codes may be cleared. If this happens, insert new batteries and register the
codes again.
1
See "List of remote control codes" (p.188) to find your
TV's remote control code.
X
If there are multiple remote control codes, register the first code in the list.
If that does not work, try the other codes.
2
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute. Otherwise,
the setting will be canceled. If this happens, repeat from Step 2.
3
Press TV z.
4
Use the Numeric keys to enter the 4-digit remote control
code.
Once the remote control code is successfully registered, SOURCE blinks
twice.
If it blinks six times, registration has failed. Repeat from Step 2.
⬛
TV operations
Once you have registered the remote control code for your TV, you can
control it using the TV operation keys, regardless of the input source
selected on the unit.
TV operation keys
157
En
INPUT Switches the video inputs of the TV.
MUTE Mutes the audio output of the TV.
TV VOL Adjust the volume of the TV.
TV CH Switch the channels of the TV.
TV z
Turns on/off the TV.