Playback; Basic Playback Procedure; Selecting An Hdmi Output Jack - Yamaha RX-A3060 Owner's Manual

SOURCE SOURCE RECEIVER RECEIVER
AV
1 2 3 4
5 6 7 V-AUX
AUDIO
Input selection keys
1 2 3 PHONO
TUNER BLUETOOTH USB NET
MAIN MAIN 2 3 4 2 3 4
PARTY PARTY HDMI OUT
HDMI OUT
ZONE ZONE
SCENE SCENE
1 1 2 2 3 3 4 4
MUTE
VOLUME
PROGRAM PROGRAM MUTE VOLUME
TOP MENU TOP MENU ON SCREEN
POP-UP/MENU POP-UP/MENU
ON
SCREEN OPTION OPTION
Cursor keys
ENTER
ENTER
RETURN RETURN DISPLAY DISPLAY
BAND BAND
MODE MODE
TUNING TUNING PRESET PRESET
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
MEMORY MEMORY
9 9 0 0 10 10 ENT ENT
TV TV
INPUT INPUT
TV VOL TV VOL TV CH TV CH
MUTE MUTE CODE SET CODE SET

PLAYBACK

Basic playback procedure

1
Turn on the external devices (such as a TV or BD/DVD
player) connected to the unit.
2
Use the Input selection keys to select an input source.
3
Start playback on the external device or select a radio
station.
Refer to the instruction manual for the external device.
For details on the following operations, see the corresponding
pages.
• Listening to FM/AM radio (p.83)
• Playing back music via Bluetooth (p.88)
• Playing back music stored on a USB storage device (p.90)
• Playing back music stored on media servers (PCs/NAS) (p.94)
• Listening to Internet radio (p.98)
• Playing back iTunes/iPod music with AirPlay (p.101)
4
Press VOLUME to adjust the volume.
X
• To mute the audio output, press MUTE. Press MUTE again to unmute.
• To adjust the treble/bass settings, use the "Option" menu or TONE/BALANCE
on the front panel (p.116).
On-screen input selection
a Press ON SCREEN.
b Use the Cursor keys to select "Input" and press ENTER.
c Use the Cursor keys to select the desired input source and press
ENTER.

Selecting an HDMI output jack

1
Press HDMI OUT to select an HDMI OUT jack.
Each time you press the key, the HDMI OUT jack to be used for
signal output changes.
OUT 1+2
OUT 1
OUT 2
Off
X
• You can also select an HDMI output jack by selecting a scene (p.75).
• When "OUT 1+2" is selected, the unit outputs video signals at the highest resolution
supported by both TVs (or projectors) connected to the unit. (For example, if you have
connected a 1080p TV to the HDMI OUT 1 jack and a 720p TV to the HDMI OUT 2 jack,
the unit outputs 720p video signals.)
• If the HDMI OUT 2 jack is assigned to Zone2 or Zone4 (p.147), you can turn on/off each
zone by pressing HDMI OUT repeatedly.
74
En
HDMI OUT Sel.
VOLUME
OUT 1+2
Outputs the same signal at both the HDMI OUT 1 and
HDMI OUT 2 jacks.
Output the signals at the selected HDMI OUT jack.
Does not output the signals at the HDMI OUT jacks.