Yamaha RX-A3060 Owner's Manual page 129

Menu
Delay Enable
Lipsync Auto/Manual Select
Adjustment
Dynamic Range
Max Volume
Initial Volume
Sound
Pure Direct Mode
Adaptive DSP Level
CINEMA DSP 3D Mode
Virtual Presence Speaker
(RX-A3060 only)
Virtual Surround Back Speaker
Object Decode Mode
Video Video Mode
HDMI Control
HDMI Audio Output
Standby Through
Network Connection
IP Address
Network Network Standby
MAC Address Filter
Network Name
Bluetooth
Disconnect
Audio Receive
Bluetooth Bluetooth Standby
Transmitter
Audio Send
Device Search
Item
Enables/disables the Lipsync adjustment for each input source.
Selects the method to adjust the delay between video and audio output.
Adjusts the delay between video and audio output manually.
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Sets the limit value of the volumes.
Sets the initial volume for when this receiver is turned on.
Selects whether to output video signals during the Pure Direct mode.
Selects whether to automatically adjust the CINEMA DSP effect level.
Enables/disables CINEMA DSP 3D.
Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers.
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.
Enables/disables playback of object-based audio signals such as Dolby Atmos contents.
Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).
Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).
Selects a device to output audio.
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
Selects the network connection method.
Configures the network parameters (such as IP address).
Selects whether to enable/disable the function that turns on the unit from other network devices.
Sets the MAC address filter to limit access to the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Enables/disables the Bluetooth functions.
Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit.
Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby).
Enables/disables the Bluetooth audio transmitter function.
Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter.
Function
129
En
Page
136
136
137
137
137
137
137
137
138
138
138
138
139
140
141
141
142
142
143
143
143
144
88
144
144
89