Yamaha RX-A3060 Owner's Manual page 116

Table of Contents

Advertisement

Item
Input Trim
(In.Trim)
Input Settings
Audio Select
(Input Settings)
(A.Sel)
Video Out
(V.Out)
FM Mode
(FM Mode)
Traffic Program
(TrafficProgram)
Shuffle
(Shuffle)
Repeat
(Repeat)
Tone Control (Tone Control)
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to 0.0 dB to +6.0 dB, 0.5 dB increments
Y
• When both "Treble" and "Bass" are 0.0 dB, "Bypass" appears.
• If you set an extreme value, sounds may not match those from other channels.
X
You can also adjust the "Tone Control" setting with the front panel controls by pressing TONE/BALANCE
repeatedly to select "Treble" or "Bass", and PROGRAM to make an adjustment.
Function
Corrects volume differences between input
sources.
Selects the audio input jack to use when more
than one audio connection is made for one input
source.
Selects a video to be output with the audio input
source.
Switches between stereo and monaural for FM
radio reception.
(U.K. and Europe models only)
Automatically searches for a traffic information
station.
Configures the shuffle setting for the USB storage
device (p.93) or media server (p.97).
Configures the repeat setting for the USB storage
device (p.93) or media server (p.97).
YPAO Volume (YPAO Volume)
Page
Enables/disables YPAO Volume or Adaptive DRC.
119
YPAO Volume (YPAO Vol.)
119
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and low-frequency
levels are automatically adjusted according to the volume so that you can enjoy natural
119
sounds even at low volume.
Settings
119
Off (Off)
Disables YPAO Volume.
On (On)
Enables YPAO Volume.
86
X
• YPAO Volume works effectively after the measurement results of "Auto Setup" have been already saved (p.53).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower volumes or at
night.
Adaptive DRC (A.DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when
the volume level is adjusted. When it is set to "On", it is useful for listening to playback at a low
volume at night.
Settings
Off (Off)
The dynamic range is not automatically adjusted.
On (On)
Automatically adjusts the dynamic range when YPAO Volume is enabled.
If "On" is selected, the dynamic range becomes narrow at a low volume and wide at a high
volume.
Volume: low
On
Off
Input level
116
En
Volume: high
On
Off
Input level

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-a2060

Table of Contents