Processing Of Each Function - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

Processing of each function

The functions are processed in the order shown below.
Function to enable/disable
A/D conversion
A/D conversion device
Over scale detection function
Average processing function
Digital clipping function
Scaling function
Shift function
Digital operation value
Maximum value/minimum
value hold function
Minimum value
Digital output value
These values are the digital values after the sampling processing, or each averaging processing has been performed.
Digital operation value
These values are obtained by operating a digital output value using the digital clipping function, scaling function, or shift
function. When each function is not used, the same value as the digital output value is stored.
Maximum and minimum value
The maximum and minimum values of the digital operation values are stored.
Digital output value
Warning output function
Maximum value
4 FX5U CPU MODULE BUILT-IN ANALOG
4.3 Functions (Analog input)
4
145