Software Installation - SeaLevel PLC-16.PCI User Manual

Software Installation

Windows 98/ME/NT/2000/XP Installation
Do not install the Adapter in the machine until the software has been fully
installed.
1. Start Windows.
2. Insert the Sealevel Systems CD in to your CD drive.
3. If 'Auto-Start' is enabled for this drive the software will automatically
4. Select 'Install Software'.
5. Select the Part Number for your adapter from the listing.
6. Select 'Windows 98/ME/NT/2000/XP'. The setup file will automatically
7. A screen may appear with the declaration: "The publisher cannot be
8. During setup the user may specify installation directories and other preferred
Windows NT Card Installation: After accomplishing the above steps, bring up the
Control Panel and double-click on the SeaIO Devices icon. To install a new card,
click "Add Port". Repeat this procedure for as many SeaIO cards as you wish to
install.
© Sealevel Systems, Inc.
launch. Otherwise, point your browser to the 'Index.htm' on the root
directory of the CD
detect the operating environment and install the proper components. Next
(depending on your browser) select the 'Run this program from its current
location' or 'Open' option. Follow the information presented on the screens
that follow.
determined due to the problems below: Authenticode signature not found."
Please select the 'Yes' button and proceed with the installation. This
declaration simply means that the Operating System is not aware of the
driver being loaded. It will not cause any harm to your system.
configurations. This program also adds entries to the system registry that are
necessary for specifying the operating parameters for each driver. An
uninstall option is also included to remove all registry/INI file entries from
the system.
- 6 -
PLC-16.PCI User Manual