CHaPTer 11: SofTWare UPGrade iNSTrUCTioNS
11.1 SofTWare UPGrade iNSTrUCTioNS
1) Three files should be present on the USB drive. These are T7x Deploy.cab, io.txt, and update.config,.
2) Turn on the treadmill power, and then wait until the standard display picture comes up (Figure A).
3) Insert the USB drive into the "REPROGRAM PORT" of the T7x console back cover (Figure B).
4) After a few seconds, the treadmill will auto run the upgrade processing. The achieved percentage of the scheduled process will be
displayed in the bottom right corner of the display (Figure C).
5) When the update is complete, the display will ask you to remove the USB drive (Figure D). Once the USB drive is removed, the treadmill
will reboot automatically.
6) Press "ENTER, 1, 0, 0, 1, ENTER" to enter into the Manager Mode on the treadmill. Then press the button next to ABOUT (Figure E).
7) Press the button next to VERSION to double check the new software version (Figure F).
8) All of the software version information will now be displayed on the screen (Figure G).
fiGUre a
fiGUre b
fiGUre C
89