To Create A Math Function - Agilent Technologies 89410A Getting Started Manual

General Tasks

To create a math function

In this section you learn how to create a math function which inverts a signal.
1
Initialize the analyzer:
Press [ ]
Preset
2
Define a constant:
Press [ ], [
Math define constant
Press [ ], 1, [
real part
3
Define a math function:
Press [ ], [
Math define F1
[ ], [ ], [ ], [
constant K1 / meas data], [spectrum] [enter
A math function remains in memory through a Preset but will be erased when
you power down the analyzer. If you want to preserve the math function for
future use, save it in the non-volatile RAM or on an internal disk.
You can create up to 6 functions and 5 constants
], [ ]
define K1
], [ ], 0, [
enter imag part enter
]
].
].
6 - 7