To Format A Disk - Agilent Technologies 89410A Getting Started Manual

1
2
3
Caution

To format a disk

Select the disk drive you want to format:
Press [ ], [
Disk Utility default disk
Press the softkey corresponding to the disk drive you want to format.
Press [ ], [
Return format disk
Select appropriate parameters for your disk drive (disk type, interleave etc.).
Press [ ], [
perform format proceed
You may format 3.5-inch disks in the internal disk drive. They must be
double-sided, high-density flexible disks that are not write-protected.
The analyzer may take a few minutes to format a disk (depending on the type of
disk) and is unavailable for other tasks during that time.
You can damage both the disk and the drive if you attempt to eject a disk when
the "Format disk in progress" message is displayed or when the disk's "busy"
light is on.
6 - 6
]
].
].
General Tasks