To Connect The Optional Frequency Reference - Agilent Technologies 89410A Getting Started Manual
Vector signal analyzer with w-cdma capability
Hide thumbs
Also See for 89410A:
- Service manual (184 pages) ,
- Operator's manual (339 pages) ,
- Installation and verification (118 pages)
Table of Contents
Advertisement
Preparing the Analyzer for Use
To connect the optional frequency reference
The analyzer may be connected to the precision frequency reference (option
AY5). The precision frequency reference is a 10 MHz high stability frequency
reference with an amplitude of approximately +5 dBm. For ease of upgrading,
the OVEN REF OUT connector is installed even when option AY5 is not
installed. To determine if the option is installed, press [
] [
].
System Utility
option setup
l
Connect OVEN REF OUT to EXT REF IN using the supplied coax BNC-to-coax
BNC connector (Agilent part number 1250-1499).
The analyzer uses its internal frequency reference if OVEN REF OUT or an
external frequency reference is not connected to EXT REF IN.
7-13
Advertisement
Table of Contents
