To Use A Math Function - Agilent Technologies 89410A Getting Started Manual

To use a math function

In this section you learn how to apply a a math function to a signal. This task
assumes that you have completed "To create a math function."
1
Initialize the analyzer:
Press [ ]
Preset
2
Provide an averaged signal from the internal source:
Connect the SOURCE to the CHANNEL 1 input with a BNC cable
Press [ ], [
Source source on
3
Apply the inversion math function you created to this signal:
Press [
Measurement Data
4
Press [ ].
Auto Scale
A user-created math function is applied to a signal
6 - 8
], [ ], [ ].
Average average on
], [ ], [ ].
math func F1
General Tasks