Fax Parameter Table - Panasonic Panafax DX-2000 User Manual

Customizing Your Machine

Fax Parameter Table

No. Parameter
001 CONTRAST
002 RESOLUTION
004 STAMP
005 MEMORY
006 DIALING METHOD
007 HEADER PRINT
008 HEADER FORMAT
009 RCV'D TIME PRINT
010 KEY/BUZZER VOLUME
012 COMM. JOURNAL
013 AUTO JOURNAL PRINT
014 FILE ACCEPTANCE
REPORT
017 RECEIVE MODE
72
Setting
Setting
Number
*1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3 Darker
1 Standard Setting the home position of the RESOLUTION key.
*2 Fine
3 400 dpi
*1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in memory,
2 On
see Fax Parameter No. 028.
1 Off Setting the home position of the MEMORY key.
*2 On
1 Pulse Selecting the dialing method.
*2 Tone
*1 Inside Selecting the printing position of the header.
Inside :
2 Outside
Outside : Outside TX copy area.
No print : Header is not printed.
3 No print
*1 Logo, ID No. Selecting the header format.
2 From To
*1 Invalid Selecting whether the machine prints the received date & time,
remote ID, percentage of reduction and page number on the
2 Valid
bottom of each received page.
1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Loud
Selecting the home position of printout mode for COMM. Journal
1 Off
Off/Always/INC.
Off :
2 Always
Always : Always prints.
Inc. only : Prints only when communication has failed.
*3 Inc. only
1 Invalid Selecting whether the machine prints the journal automatically
after every 100 transactions.
*2 Valid
*1 Invalid Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a journal will print after any
2 Valid
memory communication.
1 Manual Setting the reception mode to automatic or manual.
*2 Auto
Comments
Inside TX copy area.
Does not print.