Sending Documents Via Internet Relay; To A Location That Has A Pre-Programmed Relay Station - Panasonic Panafax DX-2000 User Manual

Sending Documents via Internet Relay

Once you have recorded all the necessary parameters in your machine, you can send a document to one or
multiple G3 fax machines automatically through the Internet Relay Station by using the procedure described
below. The Internet Relay Station must have all the necessary parameters setup.

To a Location That Has a Pre-programmed Relay Station

1
Set document(s) face down.
2
Enter only the telephone number(s) of the End Receiving
Station(s) using any combination of the following methods:
• One-Touch Dialing
• Abbreviated Dialing
• Manual Number Dialing (up to 70 stations), press
SET
• Directory Search Dialing, press
station is entered (For details, see page 93 to 96.)
02
Ex:
3
START
The document(s) is stored into memory and your machine
starts sending the document(s) to the Relay email
address of the Relay Station with the telephone number
for the End Receiving Station.
Ex: End Receiving Station : 4681111234
Relay Station
After the Relay Station completes its transmission to the
End Receiving Station(s), your machine receives a
COMM. Journal from the Relay Station. This Journal
confirms whether the Internet Relayed Transmission was
successful.
(see Note 1)
Note:
1. If the Relay Station requires a special access number to get an outside line, enter that access number first then press
to enter a pause (represented by a "-") before entering the full number.
PAUSE
after each station is entered. (see Note)
SET
(Telephone number)
[see Note 1]
: uk-rly@london.panasonic.co.uk
Relayed Transmission
ENTER STATION(S)
THEN PRESS START 00%
<02> STOCKHOLM
4681111234
after each
* STORE *
* STORE * COMPLETED
TOTAL PAGES=005
ON LINE *MEM.XMT*
ID:ur-rly#4681111234
NO.002
PAGES=001 05%
25%
163
6