Fax Parameter Table - Panasonic DF-1100 Service Manual

Fax Parameter Table

03002020002
No.
01
02
03
04
05
06
07
08
09
10
12
Continued on the next page.
03002990001
#@multitude
Setting
Parameter
Number
CONTRAST 1
2
3
4
5
RESOLUTION 1
2
3
4
PHOTO MODE 1
2
STAMP 1
2
MEMORY
1
2
DIALING METHOD 1
2
HEADER PRINT 1
2
3
HEADER FORMAT 1
2
RCV'D TIME PRINT 1
2
KEY/BUZZER VOLUME 1
2
3
COMM. JOURNAL 1
2
3
Setting
Lightest Setting the home position of the CONTRAST key.
Lighter
Normal
Darker
Darkest
Standard Setting the home position of the RESOLUTION key.
Fine
S-Fine
Photo
Fast Setting the home position of the Photo mode to either Quality
or Fast. or Fast.
Quality
Off Setting the home position of the STAMP key.
To select the stam function when document is stored in To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
On
Setting the home position of the MEMORY key.
Off
This arameter is active in the FAX Mode only. The default This parameter is active in the FAX Mode only. The default
in the FAX Mode is On. The default in the COPY Mode is Off.
On
Pulse Selecting the dialing method.
Tone
Inside Selecting the printing position of the header.
Inside Inside : Inside TX co y area. : Inside TX copy area.
Outside : Outside TX copy area.
Outside
No print : Header is not printed.
No print
Logo, ID No. Selecting the header format.
From To
Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number time remote ID percentage of reduction and page number
on the bottom of each received page.
Valid
Off Selecting the volume of the Key/Buzzer tone.
Soft
Loud
Off Selecting the home position of printout mode for COMM.
Journal Off/Always/INC. Journal Off/Always/INC
Always
Off : No printout
Always : Always prints out Always : Always prints out
Inc. only
Inc. only : Printout when communication has failed.
Installation
Comments
8–13