Panasonic Panafax DX-2000 User Manual page 77

No. Parameter
143 RELAY XMT REPORT
144 EMAIL CHARACTER
SET
145 SENDER SELECTION
146 POP TIMER
147 AUTO POP RCV
(See Note 3.)
148 DELETE POP RCV
EMAIL
149 DELETE POP ERR
EMAIL
150 IFAX RETURN RECEIPT
151 EMAIL HEADER
FORMAT
152 SUB-ADDRESS
ROUTING
153 TSI ROUTING
154 ROUTING HEADER
FORMAT
155 PRINT ROUTED
DOCUMENT
Continued on the next page...
Customizing Your Machine
Setting
Setting
Number
Setting how the COMM. Journal for relayed transmission is sent to
1 Off
the originator.
*2 Always
Off :
Always : Always send.
3 Inc. only
Inc.only : Send only if communication has failed.
1 Japanese Selecting the Character Set when receiving or sending email text.
*2 English
*1 Invalid Selecting a pre-programmed sender's name and email address
before each transmission. (See page 125)
2 Valid
-- 0 to 60 min. Setting the time interval for the machine to check for email on the
POP Server.
3 *3 min.
( 0 = Does not check the POP Server for email. )
1 Invalid Selecting whether the machine automatically downloads an email
from the POP Server.
*2 Valid
1 Invalid Selecting whether the email will be deleted automatically after
retrieval from the POP Server.
*2 Valid
*1 Invalid Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 Valid
1 Invalid Selecting whether to send a return receipt when receiving from
another Panafax Internet Fax.
*2 Valid
Selecting the header information to print when an email is
1 All
received. (Normally used for Troubleshooting. It shows the path of
the email transmission before arriving at the DX-2000.)
Subject/From/
*2
To
3 Off
*1 Invalid Selecting whether to automatically route a received fax or email
using ITU-T sub-address.
2 Valid
Selecting whether to route a received fax to a telephone number or
*1 Invalid
an email address preprogrammed in One-Touch, ABBR No. or
Program Key using the originating fax's Numeric ID (TSI frame
2 Valid
information).
Selecting the type of email header to be included in the "From"
*1 Originator
field of each routed faxes.
Originator :
Relay Station : The routing station's email address will appear in
2 Relay Station
*1 Inc. only Selecting whether a received fax to be routed is always printed or
only when the routing operation fails.
2 Always
Comments
Don't send.
The originating fax machine's TSI will appear in
the "From" field of the routed email.
the "From" field of the routed email.
3
75