One-Touch Dialing
One-Touch Dialing allows you to dial a full email address or telephone number by pressing a single key. To use
this method, you must first preprogram the email address or telephone number into the One-Touch keys.
1
You can temporarily change the transmission settings.
2
Press a One-Touch key (01-32).
01
Ex:
If a telephone number is stored into the One-Touch key,
the display shows:
3
START
The document(s) is stored into memory with a file number.
Then starts sending the email message.
(see Note 1) (see Note 2)
Note:
1. If your machine sounds an alarm (pi-pi-pi) at Step 2, this indicates that the Dialer is Full (more than 70 transmission
reservations including G3 communication have been already reserved).
2. If the transmission can not be completed for any reason, the email may be returned undelivered, otherwise no reply
will be printed.
Sending Documents via LAN
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
<01>(Station name)
abc@panasonic.com
<01>(Station name)
5551234
* STORE *
NO.001
PAGES=001
01%
* STORE * COMPLETED
TOTAL PAGES=005
25%
ON LINE * MEM.XMT *
ID:(Station name)
4
83